Solutions
-
- Drilling Tools T38 3660Mm MM
Drilling Tools T38 3660Mm MM MF Thread...
-
- Hex22 Pneumatic Rock Drilling Tool
Small Hole Drillig Tools Hex22 7/11/12 Degrees Tools Taper Drill Rod...
Bench Drilling T38
T38 is a commonly used tool for various rock drilling tools such as blast furnace opening drill bits, blast furnace cross drill rods, rock drill tails, vibrating rods, and drilling tools, also known as general-purpose drill bits.
Email:emaw@thindustrials.com
T38 is a commonly used tool for various rock drilling tools such as blast furnace opening drill bits, blast furnace cross drill rods, rock drill tails, vibrating rods, and drilling tools, also known as general-purpose drill bits.
T38 (1 1/2″)
| Button bit ( T38) | Dimensions (D) | Flushing hole (mm) | Buttons (mm) | Angle | Class | Part no. | |||
| mm | inch | Front No size |
Gauge No size |
Front No size |
Gauge No size |
||||
 |
64 | 2 1/2” | 1×6 | 3×7 | 6×11 | 4×10 | 35° | M | 3064T38F10D |
 |
64 | 2 1/2” | 1×6 | 3×7 | 6×12 | 3×11 | 35° | H | 3064T38F09 |
 |
64 70 76 89 |
2 1/2” 2 3/4” 3” 3 1/2” |
—— 2×6 2×7 2×8 |
2×9 2×8 2×9 2×13 |
8×10 8×11 8×12 8×13 |
4×10 4×11 4×11 5×12 |
35° 35° 35°35° |
H H H H |
3064T3812 3070T3812 3076T3812 3089T3813 |
 |
76 | 3” | 2×7 | 2×10 | 8×12 | 4×11 | 35° | M | 3076T38F12 |
 |
70 76 |
2 3/4” 3” |
—— —— |
4×8 4×8 |
8×11 8×12 |
5×10 5×11 |
30° 35° |
M | 3070T3813D 3076T3813D |
 |
89 | 3 1/2” | —— | 4×9 | 8×13 | 6×12 | 35° | M | 3089T3814D |
 |
64 | 2 1/2” | 1×6 | 3×7 | 6×12 | 3×11 | 35° | M | 3064T38F09R |
 |
64 70 76 |
2 1/2” 2 3/4” 3” |
2×6 2×6 2×7 |
2×9 2×8 2×9 |
8×10 8×11 8×12 |
4×10 4×11 4×12 |
30° 35° 35° |
M H H |
3064T3812R 3070T3812R 3076T3812R |
 |
89 | 3 1/2” | 2×8 | 2×11 | 8×13 | 6×12 | 35° | H | 3089T38F14R |
 |
64 | 2 1/2” | 1×6 | 3×7 | 6×11 | 4×10 | 35° | M | 3064T3810DR |
 |
70 76 89 |
2 3/4” 3” 3 1/2” |
—— —— —— |
4×8 4×8 4×10 |
8×11 8×12 8×13 |
5×10 5×11 6×12 |
30° 35° 35° |
M M M |
3070T3813DR 3076T3813DR 3089T3814DR |
 |
64 76 |
2 1/2” 3” |
2×7 2×8 |
1×7 1×8 |
3264T38 3276T38 |
||||
| Reaming Tools (T38) | Dimensions (D) | Flushing hole (mm) | Buttons (mm) | Angle | Part no. | |||
| mm | inch | Front No size |
Gauge No size |
Front No size |
Gauge No size |
|||
Dome bit |
89 102 |
3 1/2” 5” |
2×8 2×9 |
2×9 2×9 |
14×12 14×12 |
1×12 1×12 |
35° 35° |
3089T3815K 30102T3815K |
Dome bit |
127 | 5” | 2×9 | 4×8 | 16×14 | 1×14 | 35° | 30127T3817K |
Cut holes/ Dome bit |
127 | 5” | 2×11 | 2×13 | 8×14 | 10×14 | 35° | 30127T3818KC |
| Drill rod (T38) | Dimensions (L) | Dimensions (D) | Part No. | |||
| mm | Ft | inch | mm | Inch | ||
Hex rod 32 with threads T38/T38 |
3050 3660 |
10 12 |
– – |
32 32 |
1 1/4 1 1/4 |
2135T3830 2135T3836 |
Rod 38 with threads T38/T38 |
3050 3660 4270 4880 5490 |
10 12 14 16 18 |
– – – – – |
38 38 38 38 38 |
1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 |
2038T3830 2038T3836 2038T3842 2038T3848 2038T3854 |
Rod 38 with threads T38/T38(MF) |
900 1220 1525 1830 2440 3050 3660 |
3 4 5 6 8 10 12 |
– – – – – – – |
38 38 38 38 38 38 38 |
1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 |
2038T38MF09 2038T38MF12 2038T38MF15 2038T38MF18 2038T38MF24 2038T38MF30 2038T38MF36 |
| Coupling (T38) | Dimensions (D) | Length(L) | Part no. | ||
| mm | inch | mm | inch | ||
T38-T38 |
54 | 2 1/8″ | 190 | 7′ 1/2″ | MX-T385419 |
Crossover coupling T38-R32 |
54 | 2 1/8″ | 188 | 7′ 1/2″ | MX-T38R325418 |
Crossover coupling T38-T45 |
63 | 2 1/2″ | 215 | 8′ 1/2″ | MX-T38T456321 |
Inquiry
Here you can submit any questions and we will get back to you as soon as possible. We will not disclose the information you submit to anyone, please rest assured.
Inquiry